BMW 2009 X6 xDrive50i Owner's Manual

Page of 317
Opening and closing
44
Closing without pinch protection 
system
In case of danger from outside, slide the switch 
forward beyond the resistance point and hold. 
The roof closes without the pinch protection 
system.
Following interruptions in electrical 
power supply
After a power loss, the sunroof may only 
respond to the raise command. Then have the 
system initialized. BMW recommends having 
this work carried out by your BMW Sports 
Activity Vehicle Center.
Moving manually*
In the event of an electrical malfunction, you can 
move the sunroof manually:
1.
Remove trim piece. To do so, gently lift the 
corner of the trim piece with a screwdriver.
2.
Using the screwdriver, press in the clamps 
one after the other, arrows 
1, tilt the cover 
panel down, arrow 
2, and remove.
3.
Release and disconnect the motor plug. 
This significantly reduces the effort 
required for the manual movement.
4.
Insert the Allen wrench
*
 from the onboard 
tool kit, refer to page
provided. Move the panorama glass sunroof 
in the desired direction.
5.
Reconnect the plug.
6.
Clip the trim piece into the cover panel, 
arrow
1. Then fold the cover panel forward 
until it audibly clicks into place, arrow
2.
Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG