BMW 2009 X6 xDrive50i Owner's Manual
51
3.
Press the
button:
The LED in the button lights up.
4.
Press the desired memory button
1 or 2:
The LED goes out.
The positions of the driver's seat, the exte-
rior rearview mirrors, and steering wheel are
stored for the remote control currently in
use.
The positions of the driver's seat, the exte-
rior rearview mirrors, and steering wheel are
stored for the remote control currently in
use.
Calling up automatically
You can choose when the stored positions of
the driver's seat, exterior rearview mirrors, and
steering wheel are activated.
the driver's seat, exterior rearview mirrors, and
steering wheel are activated.
>
Calling up when unlocking vehicle
>
Calling up when opening driver's door
When using this feature, always make
sure that the footwell behind the driver's
sure that the footwell behind the driver's
seat is empty and unobstructed. Failure to do
so could cause injury to persons or damage to
objects behind the seat as a result of a rearward
movement of the seat.
so could cause injury to persons or damage to
objects behind the seat as a result of a rearward
movement of the seat.
<
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
Selecting calling up automatically
iDrive, for operating principle refer to page
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Settings" and press the controller.
4.
Select "Vehicle / Tires" and press the con-
troller.
troller.
5.
Change to upper field if necessary. Turn the
controller until "Door locks" is selected and
press the controller.
controller until "Door locks" is selected and
press the controller.
6.
Select "Central locking" and press the con-
troller.
troller.
7.
Select "Last seat pos." and press the con-
troller.
troller.
8.
Select "After unlocking" or "After door
opened".
opened".
9.
Press the controller.
Deactivating calling up automatically
Select "Deactivated" and press the controller.
Calling up manually
Do not call up a position from the memory
while the vehicle is moving. There is a risk
while the vehicle is moving. There is a risk
of accident from unexpected movement of the
seat or steering wheel.
seat or steering wheel.
<
Comfort mode
1.
Open the driver's door after unlocking or
switch on radio readiness.
switch on radio readiness.
2.
Briefly press the desired memory button
1
or
2.
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
Safety feature
1.
Close the driver's door and switch the igni-
tion on or off.
tion on or off.
2.
Press the desired memory button
1 or 2
and maintain pressure until the adjustment
process has been completed.
process has been completed.
If the
button was pressed inadvertently:
press the button again; the LED goes out.
Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG