BMW 2009 X6 xDrive50i Owner's Manual

Adjusting

The temperature is reduced, if need be, down to
no heat in order to reduce the load on the bat-
tery. The LEDs remain lit.

Rear

Operation similar to front seat heating; without
temperature distribution.

Active seat ventilation* and

seat heating*

Front

1 Seat heating
2 Active seat ventilation
Press button

1 or 2 once depending on the

temperature or ventilation position. The LED in
the respective button lights up.
The temperature or ventilation levels are shown
on the Control Display.
The air quantity is reduced and if need be, the
ventilation is switched off in order to reduce the
load on the battery. The LEDs remain lit.
To switch off: press button

1 or 2 longer.

Temperature distribution without
active seat ventilation

The heat output can be distributed variously in
the seat cushion and the backrest.
iDrive, for operating principle refer to page

Open the start menu.

Move the controller to the left to open "Cli-
mate".

Select "Seat heater distribution" and press
the controller.

Move the controller to the left or right to
select "Driver" or "Passenger".

Turn the controller. The adjustment is
applied; the field can be changed.

Temperature distribution with active

seat ventilation

The heat output can be distributed variously in
the seat cushion and the backrest.
iDrive, for operating principle refer to page

Open the start menu.

Move the controller to the left to open "Cli-
mate".

Select "Driver's seat climate" or "Passen-
ger's seat climate" and press the controller.