BMW 2009 X6 xDrive50i Owner's Manual

Page of 317
 71
The transmission automatically shifts into 
park if you release the driver's safety belt 
and open the driver's door with the engine run-
ning while in reverse or drive.
The picture from the rear view camera
*
 and 
PDC Park Distance Control
*
 on the Control 
Display is hidden.
<
R Reverse
Select only with the vehicle stationary.
An interlock prevents inadvertent gearshifts 
into transmission position R. To deactivate the 
interlock, press the release button
1.
P Park
Select only with the vehicle stationary. The rear 
wheels are locked.
P is engaged automatically as soon as 
you switch off the engine unless N is 
engaged and on vehicles with comfort access 
the remote control is inserted in the ignition 
lock, refer to page
<
N Neutral
Can, for example, be engaged in automatic car 
washes. The vehicle can roll.
N remains engaged even after the engine 
is switched off whenever you leave the 
remote control in the ignition lock. This function 
is used, for example, in a car wash, refer to 
page
. After approx. 30 minutes P is auto-
matically engaged.
<
D Drive, automatic position
Position for normal vehicle operation. All for-
ward gears are available.
Under normal operating conditions, the fuel 
consumption is lowest when driving in posi-
tion D.
Kick-down
The kick-down mode provides maximum accel-
eration.
Press the accelerator pedal beyond the 
increased resistance at full throttle.
Sport program and manual mode M/S
Press selector lever out of transmission 
position D toward the left: 
The sport program is activated and DS is 
displayed in the instrument cluster; in the 
BMW X6, S1 through S6 are displayed. This 
position is recommended for a performance-
oriented driving style.
When the selector lever is pressed forward or 
back, the manual mode is activated and the 
Steptronic shifts the gear. The instrument 
panel shows M1 through M6.
Upshifts and downshifts are executed only 
when they will result in a plausible combination 
of engine and vehicle speed; thus, for example, 
a downshift that would cause the engine to 
overrev will not be executed by the system. The 
selected gear is briefly displayed in the instru-
ment panel, followed by the current gear.
To use the automatic function again, press the 
selector lever to the right into position D.
BMW X6: changing gears using shifting 
paddles on steering wheel
The shifting paddles make it possible to quickly 
change gears since both hands can remain on 
the steering wheel.
>
In automatic mode D, if you shift using the 
shifting paddles on the steering wheel, then 
the system switches into manual mode.
>
If, after a certain amount of time, you neither 
shift with the shifting paddles nor acceler-
ate, then the system switches back into 
automatic mode D.
With the transmission position M/S 
selected, the manual mode remains 
active.
<
Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG