BMW 2009 X6 xDrive50i Owner's Manual

Everything under control

Some Check Control messages are displayed
until the malfunctions have been rectified. They
cannot be hidden. If a number of malfunctions
occur simultaneously, they are displayed in
succession.
Other messages are automatically hidden after
approx. 20 seconds, but remain stored.

Displaying stored Check Control

messages

Press the button on the turn signal lever
downward. "CHECK OK" or the stored
Check Control messages appear in the dis-
play.
"CHECK OK" is shown if no messages are
present.
Check Control messages are accompanied
by text messages on the Control Display.

Press the button to display additional mes-
sages, the time and outside temperature, or
the date.

Displaying additional information later

iDrive, for operating principle refer to page

Press the

button.

This opens the start menu.

Press the controller to open the menu.

Select "Info sources" and press the control-
ler.

Select "Service Info" and press the control-
ler.

Change to upper field if necessary. Turn the
controller until "Check Control messages"
is selected and press the controller.

Select a text message and press the con-
troller.

To exit the display:

Select the arrow and press the controller.

Indication of malfunction urgency

Depending on your vehicle's equipment, the
stored Check Control messages are also dis-
played with the following symbols:

No malfunctions are present in the moni-
tored systems.
Malfunctions are present in the moni-
tored systems. Depending on the mal-
function, supplementary information is
shown on the Control Display.

The symbols also indicate the status of the ser-
vice requirements display, refer to page