BMW 2007 X3 3.0si SAV Owner's Manual

t a

lanc

riv

g tip

ilit

1 Bracket
2 Telescoping rail
3 Recess in the cargo area rail

Inserting brackets

The two brackets are connected by a telescop-
ing rail.

Insert each of the brackets into the respec-
tive recess in the rail on the cargo area floor.

Press the brackets down to slide them into
the desired position.

Make sure the brackets have seated
securely. They must engage audibly.

Do not place any cargo on the brackets;
this can cause them to disengage.

Dividing cargo area

You have the following possibilities for place-
ment of the cargo:

between the backrest and the telescoping
rail

between the telescoping rail and the retain-
ing strap

Positioning the cargo between the telescoping
rail and the retaining strap:

Place the cargo against the telescoping rail.
Press the button, arrow

1 and pull the

retaining strap around the cargo, arrow

Hook the retaining strap to the recess

3 on

the telescoping rail.

Press the button on the bracket, arrow

The retaining strap is pulled tight.

You can also hook the two retaining
straps to each other.

After use of the adaptive attachment system,
roll the retaining strap back in and slide the
attachment system toward the front in order to
be able to make the best use of the cargo
area.

Removing brackets

Press down on the brackets, slide them to the
recesses in the rails, and remove.

You can also hook the two retaining
straps to each other.