BMW 2007 X5 4.8i SAV Owner's Manual
Adju
sting
42
Adjusting lumbar support*
You can also adjust the contour of the backrest
to obtain additional support in the lumbar
region.
The upper hips and spinal column receive sup-
plementary support to help you maintain a
relaxed, upright sitting position.
to obtain additional support in the lumbar
region.
The upper hips and spinal column receive sup-
plementary support to help you maintain a
relaxed, upright sitting position.
>
Increase or decrease curvature: press front
or rear section of switch.
or rear section of switch.
>
Shift curvature up or down: press upper or
lower section of switch.
lower section of switch.
Seat, mirror and steering
wheel memory*
You can store and select two different adjust-
ment settings for the driver's seat, exterior mir-
rors and steering wheel.
The adjustment of the backrest width and lum-
bar support is not stored in the memory.
ment settings for the driver's seat, exterior mir-
rors and steering wheel.
The adjustment of the backrest width and lum-
bar support is not stored in the memory.
Storing
1.
Switch on radio readiness or ignition, refer
to page
to page
2.
Set the desired seat, exterior mirror and
steering wheel positions.
steering wheel positions.
3.
Press the
button:
The LED in the button lights up.
4.
Press the desired memory button
1 or 2:
The LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
Calling up automatically
You can choose when the stored driver's seat
and exterior mirror positions are called up.
and exterior mirror positions are called up.
>
Calling up when unlocking vehicle
>
Calling up when opening driver's door
When using this feature, always make
sure that the footwell behind the driver's
sure that the footwell behind the driver's
seat is empty and unobstructed. Failure to do
so could cause injury to persons or damage to
objects behind the seat as a result of a rearward
movement of the seat.
so could cause injury to persons or damage to
objects behind the seat as a result of a rearward
movement of the seat.
<
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
Selecting calling up automatically
.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Settings" and press the controller.
4.
Select "Vehicle / Tires" and press the con-
troller.
troller.
5.
Change to upper field if necessary. Turn the
controller until "Door locks" is selected and
press the controller.
controller until "Door locks" is selected and
press the controller.
Online Edition for Part no. 01 41 0 012 501 - © 08/06 BMW AG