BMW 01 41 0 155 307 User Manual
108
n
Cargo area
Remove the roll-up cover and
partition net
partition net
1 Press the side buttons simulta-
neously (arrow 1).
2 Pull the cassette out the back
(arrow 2).
Installation
Simply slide the cassette forward in the
two side holders until it engages.
two side holders until it engages.
463de046
Store with rear backrest folded
down
down
The take-up guides for the cassette are
attached to the back sides of the seat-
backs (arrows 1).
attached to the back sides of the seat-
backs (arrows 1).
As shown in the illustration, push the
cassette in from the right side until it
clicks into place (arrow 2). When doing
this, the roll-up cover must always point
in the direction of travel, and the strap
for the partition net must point upward.
cassette in from the right side until it
clicks into place (arrow 2). When doing
this, the roll-up cover must always point
in the direction of travel, and the strap
for the partition net must point upward.
You can pull the partition net out and
insert it in the holders above it in the
upper roof area.
insert it in the holders above it in the
upper roof area.
463de047
The cassette always has to be
pushed all the way into both guide
pushed all the way into both guide
rails from the right side, or else it might
be jammed in asymmetrically. In addi-
tion, the door's interior paneling could
be damaged when shutting the door.
be jammed in asymmetrically. In addi-
tion, the door's interior paneling could
be damaged when shutting the door.
<
Online Edition for Part No. 01 41 0 155 307 - © 09/00 BMW AG