Blodgett KTT-DS User Manual

Page of 8
8
5.0  CLEANING PROCEDURES
Your kettle should be cleaned immediately after each use.
1.  Ensure that steam supply is OFF.
2.  Pre-rinse inside of kettle thoroughly and tilt to remove any food particles.
3.  Using a nylon brush, clean kettle with a mild detergent and warm water rinse.  Never use
steel wool or scouring powder as it will scratch stainless steel.
4.  Tilt kettle and rinse thoroughly draining out detergent solution.
Use of cleaning agents that contain chloride, acids or salts are corrosive and may cause pitting
and corrosion when used over a period of time; this will reduce the life of the appliances.
Should pitting or corrosion occur this is not covered by warranty.
Follow the recommended cleaning instructions.  Use a mild detergent, warm water and rinse
thoroughly.
6.0  PREVENTIVE MAINTENANCE
No preventive maintenance is required other than adhering to the Cleaning Procedure
instructions.
WARNING
IT IS NOT RECOMMENDED TO USE CLEANING AGENTS THAT ARE CORROSIVE.