Black Box Network Hardware LB9218A Leaflet

       CUSTOMER      

Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX 

              

FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 

                                              Web Site: www.blackbox.com  y E-mail: info@blackbox.com 

This installation guide gives step-by-step instructions on how to install LB9217A & LB9218A that pertains to this 
17-port modular Ethernet switch. 

LB9217A can be plugged in with the combination of different copper and fiber optic connectors.   
Following is a list of various modules pertains to this 17-port modulated Ethernet switch.  
 

 

 

 
Figure 1: Front Panel of the Chassis, LB9217A.   

Step 1:   Turn off the power before installation.  
Step 2:   Unscrew the cover plates of the module slots. Retain both the screws and the cover plates. The plates can be 

reinstalled if the module is removed. 

Step 3:   Remove the module from the static-free container then slowly slide the plug-In module into the designated slot, 

following the plastic guides.     

Step 4:   Snap in the Plug-In Module to attain a firm connection. 
Step 5:   Tighten the screws retained from original cover plate. 
Step 8:   Restore power. 
 

                               

 

 
_____________________________________________________________________ 
Figure 2: Removal of cover plate 

 

 

Fiber module being installed 

 

 

 

Figure 3: 

Internal power: 

Connect the supplied AC power cord to the receptacle on the back of the switch, and then plug it into a 

standard AC outlet with a voltage range from 100 to 240 Vac.

 

 

Modules: Ports 
LB9213A: 8TX 
LB9219A: 4TX + 4FX (SC) 
LB9216A: 6TX + 2FX (ST) 
LB9218A: 6TX + 2FX (SC) 
LB9214A: 8FX (ST) 
LB9215A: 8FX (SC) 
LB9007C-ST-R2: 1FX (ST) 
LB9017C-SC-R2 (SC)