BENDIX TCH-002-010 Leaflet
© 2008 Bendix Spicer Foundation Brake LLC 6/08. All Rights Reserved. Printed in U.S.A.
Bulletin No: TCH-002-010
Effective Date: 6/2/08
Cancels: N/A
Page: 2 of 2
Reference:
Application Guideline Catalog - BW7260
Illustrated Parts List - BW7253
Application Guideline Catalog - BW7260
Illustrated Parts List - BW7253
Available from the Literature Center at www.bendix.com
and also from www.Roadranger.com.
and also from www.Roadranger.com.
Questions or changeover information:
Call 1-800-Air-Brake (1-800-247-2725)
Call 1-800-Air-Brake (1-800-247-2725)
FIGURE 3 - EXAMPLE OF SUPPORT WELD ARRANGEMENT
Whenever available, use the axle manufacturer’s recommendations for welding the additional “Marion”
brackets - the welding notes below are shown for reference only (See Figure 3):
brackets - the welding notes below are shown for reference only (See Figure 3):
•
E70T-5 FCAW or ER70S-6 GMAW Single Pass Process 60
0
F (15.5
0
C) Minimum
Pre-Heat Temperature
•
Maximum Fit up gap of 0.16 inch (4mm)
•
The order of welding may be reversed or started on the opposite side
•
The direction of welding may be completely reversed