Brother PT-P750W User Manual
Printing from iOS Devices
15
3
Connecting the P-touch labeler to Your iOS Device
3
a
Connect the P-touch labeler and computer with a USB cable.
b
If the Wi-Fi lamp is not lit, press and hold the Wireless Mode button for one second to turn on the wireless
LAN function.
After the Wi-Fi lamp is lit, release the button. The Wi-Fi lamp flashes.
LAN function.
After the Wi-Fi lamp is lit, release the button. The Wi-Fi lamp flashes.
c
For Windows
®
Start the Printer Setting Tool on your computer, and click the [Communication settings] button. Confirm
that the [Enable Wireless Direct when Wireless LAN is turned on] checkbox is selected in the [General]
tab of the Communication settings.
(This is selected as the factory default.)
See Using the Communication Settings on page 19 for details on the Communication settings.
For Macintosh
Start the P-touch Utility with your computer, and confirm that [Wireless Direct] is set to [ON] in the
[Wireless Direct] tab.
See Brother P-touch Utility (for Macintosh) on page 35 for details on the P-touch Utility.
that the [Enable Wireless Direct when Wireless LAN is turned on] checkbox is selected in the [General]
tab of the Communication settings.
(This is selected as the factory default.)
See Using the Communication Settings on page 19 for details on the Communication settings.
For Macintosh
Start the P-touch Utility with your computer, and confirm that [Wireless Direct] is set to [ON] in the
[Wireless Direct] tab.
See Brother P-touch Utility (for Macintosh) on page 35 for details on the P-touch Utility.
d
In the Wi-Fi settings screen of your iOS device, select the SSID of the P-touch labeler and enter the
password.
password.
Note
• The factory default SSID and password are as follows:
SSID: “DIRECT-brPT-P750W****” where “****” is the last four digits of the product serial number.
(You can find the serial number label by opening the cassette cover.)
Password (Network key): 00000000
(You can find the serial number label by opening the cassette cover.)
Password (Network key): 00000000
• If you want to print the SSID and password, press the Wireless Mode button twice.
(Use 0.94" (24 mm) tape.)
• You can also connect the P-touch labeler to an iOS device in the infrastructure mode via a WLAN access
point/router.
Printing from Your iOS Device
3
a
Start one of the Brother applications for mobile devices with your iOS device.
(See Available Applications for Use with iOS Devices on page 14.)
(See Available Applications for Use with iOS Devices on page 14.)
b
After editing the data you want to print, tap [Print].