Brother DCP-7055 User Manual
Chapter 2
10
c
Using both hands, slide the manual feed
slot paper guides to the width of the
paper that you are going to use.
slot paper guides to the width of the
paper that you are going to use.
d
Using both hands, put one sheet of
paper in the manual feed slot until the
front edge of the paper or transparency
touches the paper feed roller. When you
feel the machine pull in the paper, let go.
paper in the manual feed slot until the
front edge of the paper or transparency
touches the paper feed roller. When you
feel the machine pull in the paper, let go.
Printing on thick paper, bond paper,
labels, and envelopes
labels, and envelopes
2
When the back output tray is pulled down, the
machine has a straight paper path from the
manual feed slot through to the back of the
machine. Use this paper feed and output
method when you want to print on thick
paper, labels or envelopes.
machine has a straight paper path from the
manual feed slot through to the back of the
machine. Use this paper feed and output
method when you want to print on thick
paper, labels or envelopes.
Note
Remove each printed sheet or envelope
immediately to prevent a paper jam.
immediately to prevent a paper jam.
a
Open the back cover (back output tray).
b
(For printing envelopes)
Pull down the two green levers, one on
the left-hand side and one on the right-
hand side, as shown in the illustration
below.
Pull down the two green levers, one on
the left-hand side and one on the right-
hand side, as shown in the illustration
below.