Brother DCP-7055 User Manual

The machine prints unexpectedly 
or it prints garbage.



Press Job Cancel to cancel print jobs.



Check the settings in your application to make sure it is set up to work with 
your machine.



Pull out the paper tray and wait until the machine stops printing. Then turn off 
the machine’s power switch and disconnect from the power for several 
minutes.

The machine prints the first couple 
of pages correctly, then some 
pages have text missing.



Check the settings in your application to make sure that it is set up to work with 
your machine.



Your computer is not recognising the machine’s input buffer’s full signal. Make 
sure that you connected the interface cable correctly. (See the Quick Setup 
Guide.)

The headers or footers appear 
when the document displays on the 
screen but they do not show up 
when it is printed.

There is an unprintable area on the top and bottom of the page. Adjust the top and 
bottom margins in your document to allow for this. (See Unscannable and 
unprintable areas on page 13.)

The machine does not print on both 
sides of the paper even though the 
printer driver setting is Duplex.

Check the paper size setting in the printer driver. You need to choose A4 [60 to 
105 g/m

2

].

The machine is not printing or has 
stopped printing.

Press Job Cancel.

As the machine cancels the job and clears it from the memory it may produce an 
incomplete printout.

TWAIN errors appear while 
scanning.

Make sure that the Brother TWAIN driver is chosen as the primary source. In 
Presto! PageManager, click File, Select source and choose the Brother TWAIN 
driver.

OCR does not work.

Try increasing the scanning resolution.

(Macintosh users) 
Presto! PageManager must be downloaded and installed before use. See 
Accessing Brother Support (Macintosh) on page 3 for further instructions.

Cannot install software or print.

Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair 
and reinstall the software.

Cannot perform ‘2 in 1’ or ‘4 in 1’ 
printing.

Check that the paper size setting in the application and in the printer driver are the 
same.

The machine does not print from 
Adobe

®

 Illustrator

®

.

Try to reduce the print resolution. (See Advanced tab in the Software User's 
Guide.)