Boss Audio Systems GT-6 User Manual
16
Chapter 1 Playing Sounds
Switching the Bank and Number
fig.01-16
1. Press a BANK pedal.
The bank switches, then the indicator for the numbered
pedal that was active before the BANK pedal was
pressed starts flashing, indicating that the GT-6 is ready
for selection of the patch number (at this stage, however,
the patch is not switched yet).
pedal that was active before the BANK pedal was
pressed starts flashing, indicating that the GT-6 is ready
for selection of the patch number (at this stage, however,
the patch is not switched yet).
2. Select the number of the patch you want to switch to by
pressing the corresponding number pedal.
The indicator for the selected number pedal lights up,
and the GT-6 switches to that patch.
and the GT-6 switches to that patch.
About the Display Indication
The following information appears in the Play screen.
fig.01-17
If the Patch Does Not Switch
On the GT-6, you cannot switch patches in any screen other
than the Play screen. Press [EXIT] to return to the Play screen
(p. 13).
than the Play screen. Press [EXIT] to return to the Play screen
(p. 13).
2
1
Bank—Number
Bank
User/Preset
Patch Name