Boss Audio Systems GT-6B User Manual

Chapter 5 Setting the Pedal Functions (Pedal Assign)

Chapter

Active Range

fig.05-18

When an expression pedal or other controller that changes
the value consecutively is used as the source, this sets the
operational range within which the value of the setting
changes. If the controller is moved outside the operational
range, the value does not change, but instead stops at
“minimum” or “maximum.”

(Example) Act. Range Lo: 40, Act. Range Hi: 80

fig.05-19a

fig.05-19b

* When using a foot switch or other on/off switching controller

as the source, leave these at “Lo: 0” and “Hi: 127.” With
certain settings, the value may not change.

Controlling Foot Volume and Pitch Shifter
with an External Expression Pedal

Make the following settings to use an expression pedal
connected to the SUB EXP PEDAL/SUB CTL 1,2 jack to
control foot volume and pitch shifter.

* Set SYS: Sub CTL1 Func (p. 63) to “Assignable.”

1. Press [PEDAL ASSIGN].

2. Press PARAMETER [

] [

], to display one of the

Assign On/Off screens for ASSIGN 1–8.

fig.05-10

* When the upper row of the screen indicates “OFF” (flashing),

press [PEDAL ASSIGN] to set it to “ON” (lit).

3. Rotate the PATCH/VALUE dial to select the following

settings:

For Foot Volume:

SUB EXP FV

For Pitch Shifter:

SUB EXP PS

fig.05-20

4. If Pitch Bend has been selected in Step 3, carry out the

following.

Press [FX-2] so that “On” appears in the display.

Next, press PARAMETER [

] [

] to display “FX

Select,” then select “P.S” with the PATCH/VALUE dial.

127

maximum value

Target Max

minimum value

Target Min

Act. Range

OFF

Off

Center

value

127

Act. Range
Max

Act. Range