Manualsbrain.com
  1. Manuals
  2. Brands
  3. Boss Audio Systems
  4. GT-6B
  5. User Manual

Boss Audio Systems GT-6B User Manual

Download
Page of 84
67
Chapter 10 Using MIDI
Chapter 10
Transmitting and Receiving 
MIDI Data
On the GT-6B, you can use Exclusive messages to provide 
another GT-6B with identical settings, and save effect 
settings on a sequencer or other device. This transmission of 
data is called “Bulk Dump,” while receiving such data is 
referred to as “Bulk Load.”
Transmitting Data to an External 
MIDI Device (Bulk Dump)
The following types of data can be transmitted. You can 
transmit data by specifying the range from the start to the 
end of transmission.
Making the Connections 
When Saving to a MIDI Sequencer
Connect as shown in the figure below, and put the sequencer 
in the mode where it is standing by, ready to receive 
Exclusive messages.
fig.10-15
* For instructions on operating the sequencer, refer to the 
owner’s manual for the sequencer you are using.
When Transmitting Data to Another GT-6B
Connect as shown in the figure below, and match the Device 
ID for the transmitting and receiving devices.
fig.10-16
Transmitting
fig.10-17
1. Press [UTILITY], then press PARAMETER [
] 
[
] so that “Bulk Dump” is displayed.
fig.10-18
2. Press PARAMETER [
] [
] to move the cursor, 
and rotate the PATCH/VALUE dial to select the start 
and end of the data to be transmitted.
3. When the data to be sent has been determined, press 
[WRITE].
The data is transmitted.
Displayed
Data Transmitted
System
Includes settings for utility parameters, 
Harmonist scales, Auto Slap phrases and 
overdrive/distortion, and wah custom 
edit parameters.
U1-1–U0-4, 
u1-1–u0-4
Settings for patch Numbers U1-1 through 
U0-4 and u1-1 through u0-4
Temp
Settings for what is currently being played
MIDI OUT
MIDI IN
MIDI OUT
MIDI IN
4 3
2
1,2
1