Manualsbrain.com
  1. Manuals
  2. Brands
  3. Boss Audio Systems
  4. BR-900CD
  5. User Manual

Boss Audio Systems BR-900CD User Manual

Download
Page of 232
103
Mastering
Section 3
5. Use the TIME/VALUE dial to select the Preset/Song/
User patch and number for the Mastering Tool Kit.
6. Press [EXIT] to return to the Play screen.
The overall volume is adjusted by the MASTER fader. At 
this time, raise the volume as high as possible without 
allowing the sound to distort.
7. Press [REC].
[REC] flashes in red and the BR-900CD enters the 
recording standby state.
fig.01-804
8. Press [PLAY].
[REC] stop flashing in red and instead light solidly, and 
recording starts.
fig.01-805
9. When you finish mastering, press [STOP].
* During updating, “Keep power on!” appears in the upper line 
of the display, while the lower line shows what is being 
processed.
Editing the Mastering Tool Kit 
Settings
To create a new patch, select the patch that most closely 
resembles the sound you have in mind from the effects 
patches already stored in the unit, then edit its settings.
If you wish to save the effect settings that you edited, save 
them as a user patch or song patch.
Mastering mode.
2. Press [EFFECTS] (MASTERING TOOL KIT).
The Mastering Tool Kit selection screen appears.
fig.01-806d
3. Use the TIME/VALUE dial to select the Preset/Song/
User and number.
4. Press CURSOR [
] to move the cursor to “EDIT,” and 
press [ENTER].
The display switches to the Mastering Tool Kit Edit 
screen, which shows the algorithm (the effects used, 
shown in the sequence they are connected).
fig.01-807d
You can also display this screen directly by pressing 
[ENTER] while the cursor is positioned at the Preset/Song/
User or number.
Flash
Lit
P: Preset / S: Song / U: User
Number
Bank
Patch Name
Algorithm
Name