Manualsbrain.com
  1. Manuals
  2. Brands
  3. Boss Audio Systems
  4. BR-900CD
  5. User Manual

Boss Audio Systems BR-900CD User Manual

Download
Page of 232
213
Section 9
Error Messages
If you attempt an incorrect operation or if an operation could 
not be executed, the display will indicate an error message. 
Refer to this list and take the appropriate action.
Battery Low!
Cause:
The batteries are depleted (6 x AA dry-cell 
batteries).
Solution:
Replace the batteries as soon as possible (p. 23).
Blank Disc!
Cause:
Disc in the CD-R/RW drive contains no data.
Solution:
Load a CD-R/RW disc that has data written on it.
Cannot Edit! Quantize is Low!
Cause:
During Step Recording of a pattern, the Quantize 
setting is too coarse, so multiple entries are 
appearing at the same point in the matrix.
Solution:
Cannot Edit! This is a Preset
Cause:
Preset data is selected; you cannot edit this data.
Solution:
Copy the song data and then edit that.
Cannot Erase!
Cause: 
No further steps can be erased.
Solution: 
The Pitch Correction Map must contain a 
minimum of one step.
Cannot Insert!
Cause: 
No further steps can be inserted.
Solution: 
The Pitch Correction Map can contain a 
maximum of 99 steps.
Cannot Program! Rhythm Off.
Cause:
The Rhythm is switched off, so you cannot 
program it.
Solution:
Press [ARRANGE/PATTERN/OFF] to select 
Arrange mode or Pattern mode.
Cannot Punch In for CD-R/RW!
Cause: 
You cannot punch in when a CD is specified as 
the bounce destination.
Solution:
If using the punch-in function, specify a track as 
the bounce destination.
Card Full!
Cause:
It is not possible to record or copy due to small 
memory capacity.
Solution1:
Solution2:
Card Read Error!
Cause:
Memory card data cannot be loaded correctly.
Solution 1: Turn off the BR-900CD, properly insert the 
memory card, then turn the BR-900CD back on.
* If the same message appears after you have taken the above 
steps, it is possible that the memory card is malfunctioning.
Card Write Error!
Cause:
An error occurred while writing data to the 
memory card.
Solution:
The memory card must be initialized (p. 196). 
Also, the song data you had been attempting to 
save will be lost.
CD Full!
Cause 1: 
The CD-R/RW disc is full, and no more data 
can be written to it.
Cause 2: 
When creating an audio CD, the total time of the 
tracks exceeds the capacity of the CD-R/RW disc.
Solution: 
Either reduce the amount of data to be written, 
or place a new CD-R/RW disc in the drive and 
start the procedure over again.
CD Medium Error!
Cause: 
There is a problem with the CD-R/RW disc. 
Alternatively, the disc on the CD-R/RW drive 
is unreadable.
Solution 1:  Confirm that the correct type of disc is placed in 
the CD-R/RW drive.
Solution 2:  Use a new CD-R/RW disc.
CD Read Error!
Cause: 
An error occurred while reading data from the 
CD-R/RW disc.
Solution: 
This may be due to a low-quality or dated disc. 
Try using a new CD-R/RW disc.
CD Write Error!
Cause: 
An error occurred while writing data to the 
CD-R/RW disc.
Solution: 
This may be due to a low-quality or dated disc. 
Try using a new CD-R/RW disc.
Data Too Short!
Cause: 
You have attempted to import a WAV/AIFF 
file shorter than one second or to load a WAV/
AIFF file shorter than 0.1 seconds using the 
Tone Load function.
Solution: 
Make sure the WAV/AIFF file to be loaded is at 
least one second in length, or if using the Tone 
Load function, select a WAV/AIFF file that is at 
least 0.1 seconds in length.
Cause: 
You attempted to write an audio CD with a 
track that is less than four seconds in length.
Solution: 
Prepare tracks being written to audio CDs so 
that they are at least four seconds long.