Boss Audio Systems BR-900CD User Manual

By using the “Repeat function” you can repeatedly play back 
a specified part. Repeating playback allows you to check the 
mixing balance or perform loop recordings (p. 56) with the 
punch in/out functions.

The position in the song where [REPEAT] is pressed first 
becomes repeat start point (A), and the position where it is 
pressed a second time becomes repeat end point (B). The 
portion between the two points is then repeated during 
playback.

fig.01-201

Press [REPEAT] again to cancel the repeat function and 
delete the start and stop points.

Move to the position where you want the repeat to start 
and press [REPEAT].

fig.01-202

The position is set as repeat start point (A). 

The [REPEAT] indicator begins to flash, telling you that 
the repeat start point (A) has been registered.

If you wish to re-do the registration, you can cancel the 
registered location by pressing [REPEAT] when the 
current location is the same as the repeat start point (A).

If the current location is beyond the repeat start point 
(A), press [REPEAT] twice to cancel the registration.

The [REPEAT] indicator goes out, and the registered 
repeat start point (A) and end point (B) are deleted.

Move to the position where you want the repeat to end 
and press [REPEAT]. 

fig.01-203

That position becomes repeat end point (B). 

The [REPEAT] indicator lights, telling you that the 
repeat end point (B) has been registered.

To re-do the registration, press [REPEAT] once again. 

The [REPEAT] indicator goes out, and the registered 
repeat start point (A) and end point (B) are deleted.

Then press [REPEAT] again and register repeat start 
point (A) and end point (B) as desired.

Time