Boss Audio Systems BR-900CD User Manual
78
Organizing the Songs You’ve Recorded
Saving Memory on the
Memory Card (Song Optimize)
Memory Card (Song Optimize)
When you perform overdubbing or punch-in/out, the data
that you rewrite (replace) actually remains on the memory
card. In some cases, this unwanted data may occupy a
significant amount of space on the memory card. This will
cause the time available for recording to be less than it
should be.
that you rewrite (replace) actually remains on the memory
card. In some cases, this unwanted data may occupy a
significant amount of space on the memory card. This will
cause the time available for recording to be less than it
should be.
By performing a “Song Optimize,” you can have the BR-
900CD erase any unnecessary data on the memory card and
increase the unused space.
900CD erase any unnecessary data on the memory card and
increase the unused space.
1. Press [UTILITY].
2. Press CURSOR [
] [
] to move the cursor to “EDT,”
and press [ENTER].
fig.02-405d
3. Press CURSOR [
] [
] to move the cursor to “OPT,”
and press [ENTER].
“Are you sure?” appears in the display.
fig.02-406d
4. To continue with the optimization, press [ENTER]
(YES).
The Song Optimize function is carried out. When
completed, “Completed!” appears in the display, and
you are returned to the Play screen.
completed, “Completed!” appears in the display, and
you are returned to the Play screen.
To cancel the operation press the [EXIT] (NO) (or
[UTILITY]).
[UTILITY]).
* Depending on the situation, an appreciable length of time may
be required for Optimize to be completed. This is not a
malfunction. Do not turn off the power until Optimize has
completed.
malfunction. Do not turn off the power until Optimize has
completed.
* After you execute Optimize, it is not possible to undo/redo to
revert to the state before executing Optimize.
Naming Songs (Song Name)
When a new song is created, it is automatically given a name
such as “SONG 0001.” With your BR-900CD, you can use
“Song Name” to give each song a name, which helps you
manage and organize your songs.
such as “SONG 0001.” With your BR-900CD, you can use
“Song Name” to give each song a name, which helps you
manage and organize your songs.
1. Press [UTILITY].
2. Press CURSOR [
] [
] to move the cursor to “EDT,”
and press [ENTER].
fig.02-407d
3. Press CURSOR [
] [
] to move the cursor to
“NAM,” and press [ENTER].
The name of the song (Song Name) appears in the
display.
display.
fig.02-408d
4. Press CURSOR [
] [
] to move the cursor to the
character you want to change.
5. Rotate TIME/VALUE dial to select the character.
* You can switch between upper case and lower case characters
by pressing [ENTER].
6. After the name is properly entered, press [UTILITY] (or
press [EXIT] repeatedly) to return to the Play screen.