Boss Audio Systems BR-900CD User Manual

By default, the insert effect is inserted immediately after the 
input source. The reason for this is to allow for the effects-
processed (wet) sound to be recorded and monitored. 
However, sometimes you want to change the connection 
order. 

On the BR-900CD, you can accommodate a wide variety of 
situations by changing the point to which the insert effects 
are connected.

Follow the procedure below to change where insert effects 
are connected.

fig.01-510d

The sound is monitored and recorded after it passes 
through the insert effect. Normally you will use the BR-
900CD with this setting.

fig.01-511

The sound is monitored through the insert effect but is 
recorded without the effect (dry).

fig.01-512

The insert effect can be applied to the playback of a track 
(or pair of tracks). Use this when you wish to try out 
effects after recording the dry sound, or when you wish 
to apply effects only to a specific track.

fig.01-513

The insert effect can be applied to the playback of a 
Rhythm.

fig.01-513a

Use this when you wish to apply effects to the entire 
song, such as when adjusting the tone or applying a 
special effect during mixdown.

fig.01-514