Boss Audio Systems audio system bv9565bi User Manual

14

02

1.Take out the Outer Trim Frame.

Detach the front panel before disassembl-
ing the unit. 

2.Insert the keys supplied to the unit at
both sides of the unit (shown as illustrated) 
until they click. Pulling the keys makes it 
possible to remove the unit from the dashboard.

Mounting Sleeve x1

Rear Mounting Bolt x1

Harness Rubber x1

Keys x 2

Outer Trim Frame x 1

Connecting Wire x1

Steel Bar x 1

 

4 Screws 

 M 5 x 5

£p

5 Screws 

 M 5 x 20

£p

9

USB Connecting Wire
(optional)

06

35

During  CD  status, press OSD button the 
display shows:

*   This function is operated by using the remote 
     control.

*   Pressing       in the monitor also performs the 
     same function.

During CD/MP3/SD/USB playback, Press
          to switch between play and pause. 
       

Press      (     or     ) on remote control to 
perform fast rewind or fast forward.  

20

    2 X           4 X           8 X           16 X      

   *   This function is operated by using the remote 
        control.

During CD mode, press      PROG, the TFT
displays the program menu. Press NUMBER 
BUTTONS to select the track Number and
then press      to move the cursor to START.
Press ENTER to start program playing. 
Move the cursor to EXIT and press ENTER
to exit the program playing. Move the cursor
to       and press ENTER to the previous page; 
move the cursor to       and press ENTER to 
the next page. During this process, press
           to cancel the program playing.

13

18

The function is only valid on remote control.

*

27

*   Press      CLEAR to clear the mistake input.

22

Push SD card to eject it.
During SD Mode:,ejecting the SD card will 
switch the unit to DISC mode. If there is 
no disc, the unit will switch to USB Mode. 
If no USB, the unit will switch to Radio mode.

Pull out the USB to eject it.
During USB Mode, removing the USB will 
switch the unit to Disc. If there is no DISC, 
it will switch to Radio mode.