Bosch 24" Compact Condensation Dryer Axxis WTB86201UC Owner's Manual

30

NOTICE:  Before doing maintenance work or trying to 

rectify a problem by yourself, rotate the program selector 

to Off. 

The program will not continue running when the power 

supply has been restored.  Desired program must be 

selected again and start button pressed.

9

RISK OF INJURY TO SKIN
The door, the drum and the laundry may be hot.

9

RISK OF ELECTRIC SHOCK! EXPLOSION HAZARD
Repairs or replacement of parts should be carried 

out by authorized technicians only.

Before calling the customer service, check whether you 

can rectify the fault yourself by means of the following 

table.
If a fault cannot be rectified or a repair is required:

Set program selector to the Off.

Pull the mains plug out of the socket.

Call customer service. 
~ Customer service; Page 4

If you encounter a problem, it often will merely be 

something minor. Before you call customer service, 

consider the suggestions and instructions below:
NOTICE:  The troubleshooting items listed below can 

help you resolve minor issues with your dryer quickly and 

without the necessity of waiting for a service call.
Service calls for issues that could have been solved by 

Determing the Problem 

Dryer does not start.
Start/Pause indicator 

light does not illumi-

nate.

Main plug not inserted at all or not 

inserted correctly.

Insert main plug correctly.

A fuse of power supply is tripped.

Replace/switch on fuse.

Start/Pause button not pressed.

Press Start/Pause button.

Door not closed properly.

Check if laundry is caught in the door, address the 

issue. Close the door until a click is heard.

Ambient temperature below 41

°

F/

5

°

C.

Increase room temperature. 
~ Your dryer is intended for; Page 5

Program not selected.

Rotate the program selector to desired program. 
~ Program selection table; Page 20

The display panel light-

ing and indicator lights 

go out, Start/Pause 

indicator light flashes.

Energy-saving mode is activated.

Press any button to activate the lighting. 
~ Environmentally friendly use of your dryer; Page 7

The display panel 

switches off.

Sleep mode after setting the Fin-

ished in option is activated.

Press any button to activate the lighting.

The Cleaning req. indi-

cator light up.

Lint filter dirty.

Clean lint filter. 
~ Cleaning the lint filter; Page 27
Press the Start/Pause button to reset the displayed 

indication and then press Start/Pause button again to 

reset the appliance if necessary.

Heat exchanger dirty.

Clean heat exchanger. 
~ Cleaning the heat exchanger; Page 28
Press the Start/Pause button to reset the displayed 

indication and then press Start/Pause button again to 

reset the appliance if necessary.