Bosch 24" Compact Condensation Dryer Axxis WTB86202UC Owner's Manual

26

▯

If Check drain indicator lights up, check the drain 

hose and its connection. 
~ Maintenance of drain hose; Page 29

If required, select Low Heat by pressing the button. 

If required, select Wrinkle Block by pressing the 

button. 
~ Additional options; Page 21

Tip: The estimated remaining time will be updated.

The dryer uses an electronic control system. A moisture 

sensor continuously checks the moisture in the laundry. 

Drying ends automatically as soon as the selected 

degree of dryness has been reached.
The drum continues to rotate at specific intervals for one 

hour to prevent creasing.
The current state of the process and level reached during 

the program sequence is indicated by indicator lights 

(dry, damp, regular).

You can secure the dryer against inadvertent changing of 

the set functions. To do this, activate the childproof lock 

after cycle start.
To Activate/Deactivate, press Start/Pause for approx. 5 

seconds. In the display field, you will see the 

D

 symbol 

light indicating the childproof lock is active.
NOTICE:  The childproof lock will remain activated until 

the next cycle start even after switching the machine off. 
You must deactivate the childproof lock before the next 

cycle and, if necessary, activate it again after starting the 

cycle.

If you have inadvertently started the wrong program, you 

can change this as follows:

Press Start/Pause.

Select another program.

Press Start/Pause. The new drying cycle starts from 

the beginning.

If required, you can cancel the selected program:

Press Start/Pause.

Rotate the program selector to Off.

End appears in the display area, the Start/Pause button 

indicator lamp is off and the regular indicator lights up.
After the program end, rotate the program selector to 

Off.

Open the door and remove the laundry.

Turn the program selector to the Off position. 

Appliance is switched off and dryer light goes out.

Clean lint filter. 
~ Cleaning the lint filter; Page 27

Close the door.

Tip: If at the end of the drying cycle the display does not 

light, the energy-saving mode is active. To see diplay, 

e.g. press any button. 
~ Environmentally friendly use of your dryer; Page 7

For switching the buzzer on and off press the Signal 

button.
The Buzzer indicates program end if it is activated.
Other alarms are not influenced by this option.