Bosch Appliances Webcam 3922 988 43318 User Manual

Page of 172
  2
Bosch Security Systems | 04-2003 | 3922 988 43318 en
Digital Congress Network | Installation  and Operating Manual | Chapter 10 - Installation Techniques
en | 10-12
Computer Based Systems
10.7   Computer Based Systems
The DCN 2000 system offers two methods for connecting a central control PC to the DCN system: 
DIRECT and IN-DIRECT.
DIRECT connection
 Using this method, the built-in RS232 port located at the rear 
of the CCU (LBB 3500/15 and LBB 3500/35 only) is used to connect the CCU to a COM-port of the 
control PC. See also 
 DCN Control using Personal Computers.
IMPORTANT: 
 When using the DIRECT connection method between the Control PC 
and the CCU, the central operator has NO facilities on the PC for using headphones or an 
intercom handset.  Additional DCN units are then required to provide these functions.
IN-DIRECT connection
Using this method, a Network card LBB 3510/00
 (see 
is installed in the central control PC.  Using the cable supplied with the Network card 
LBB 3510/00, connect the 15-pole D-type connector to the 15-pole D-type socket located on the 
PC Network card,  and connect the DCN 6-pole modular connector to the DCN trunk-line Cabling. 
Ensure the PC Network card is configured and set-up correctly
.
DIRECT Connection from CCU to PC
FIG 10-16 Direct connection
IN-DIRECT Connection using PC Network card LBB 3510/0
FIG 10-17 Connection using PC Network card
IMPORTANT: 
                                                                                                               
1.
A ‘DIRECT’ connection is ‘MANDATORY’ when the control PC uses  ‘‘Windows NT 
4.0’, Windows 2000 or Windows XP Professional as the operating system.
2.
When using ‘Windows 95 or Windows 98 both the ‘DIRECT’ or ‘INDIRECT’ method 
may be used, but NEVER at the same time.
3.
When using the IN-DIRECT connection method, facilities are available on the PC     
Network card for using headphones or an intercom handset.  
Rec.
Port 1
Line
In
Out
In
Out
Symmetrical
Trunk
115 V-T4A  230 V -T2A
PC SYSTEM 
FOR 180 PCF
PC 
LBB 3500/15 & /35 
DIRECT 
LBB 4114/00 
PCF 
 180 
Rec.
Port 1
Port 2
Line
In
Out
In
Out
Symmetrical
Trunk
115 V-T4A  230 V -T2A
NOTE: 
 shows a PC system catering for a PCF of 180.  Because the Network 
card (PC) has no loop-through facility,  a trunk splitter LBB 4114/00 is used.
PC SYSTEM 
FOR 180 PCF
PC 
PCF 
 180 
LBB 4114/00 
LBB 3500/15 & /35 
PC Network Card
LBB 3510/00 
IN-DIRECT