Bosch 2400E User Manual

8

6 720 606 990

while turning on the power switch (I).
Release program key when LCD
displays “188”.

LCD shows “P2”. If not, repeat
previous step.

B Select “P3” using buttons 

 and

 on heater.

B Press and hold Program key 

or 

 again for 1 sec.

LCD shows one number and one
rotating digit. If not, repeat previous
step.
The number represents the remote
control which is to be registered, the
first remote control will be registered
with number “0”, the second with
number “1” and so on.
The rotating digit shows that the
electronics is expecting a registration.
If the LCD fails to show a number and
rotating digit after repeated attempts,
double check the wire connections
made in section 4.2.

B Hold remote control in front of the

control panel on the heater and
press simultaneously remote control
buttons  

and  

until 

the

temperature indication is shown on
the remote control LCD.

B Switch power switch on the

appliance to the "OFF" (0) position
and then back "ON" (I).

B Press buttons 

 or 

 in order

to reach requested temperature.

New remote control is programmed.

B Connect power to heater.

B Move the main switch on the

appliance to the "OFF" (0) position.

B Press and hold 

 key while at the

same time turning the main switch to
“ON” position (I).

LCD shows one number and one

rotating digit. If not repeat previous

step.

The number represents the remote

control which is to be registered, the

first remote control will be registered

with number “0”, the second with

number “1” and so on.

The rotating digit shows that the

electronics is expecting a registration.

If the LCD fails to show a number and

rotating digit after repeated attempts,

double check the wire connections

made in section 4.2.

B Hold remote control in front of the

control panel on the heater and
press simultaneously remote control
buttons 

 or 

 until the

6720606990-0701_(Remote control).fm  Page 8  Tuesday, January 30, 2007  10:07 AM