Bosch 2400E User Manual
9
Using the remote control
6 720 606 990
temperature indication is shown on
the remote control LCD.
the remote control LCD.
B Switch ON/OFF switch to “OFF”
position (0) and then back on (I).
B Press buttons
or
in order
to reach requested temperature.
New remote control is programmed.
4.4
Hot water temperature
adjustment by remote
control
adjustment by remote
control
B Press the buttons
or
on
the remote control (Fig. 8, pos. 2)
until the required temperature
appears on the remote control
display (Fig. 8, pos. 1).
until the required temperature
appears on the remote control
display (Fig. 8, pos. 1).
B When the required temperature is
displayed, turn on the hot water tap.
B The required temperature will flash
on the remote control display.
B The flashing will stop when the
required temperature is reached
(tolerance from selected set point +/
-5°F (+/- 2°C).
(tolerance from selected set point +/
-5°F (+/- 2°C).
Fig. 8
Temperature adjustment
4.5
"Program" button on the
remote control
remote control
Memorizing the water
temperature with the remote
control "Program" button
temperature with the remote
control "Program" button
B Press the buttons
or
on
the remote control (Fig. 9, pos. 2), )
until the required temperature
appears on the remote control
display (Fig. 9, pos. 1).
until the required temperature
appears on the remote control
display (Fig. 9, pos. 1).
B You will now be able to memorize
this temperature by pressing the
"Program" button on the remote
control (Fig. 9, pos. 3) for 3
seconds.
"Program" button on the remote
control (Fig. 9, pos. 3) for 3
seconds.
i
Note: Previously saved
temperature may show
on the display when first
pushing the program
button. Once "PR"
shows on the display,
the desired setting will
be saved.
temperature may show
on the display when first
pushing the program
button. Once "PR"
shows on the display,
the desired setting will
be saved.
6720606990-0701_(Remote control).fm Page 9 Tuesday, January 30, 2007 10:07 AM