Bosch Appliances Smoke Alarm D2071A User Manual
17
Bosch | 09/04 | 74-06200-000-F
2.9.1
Screw Mounting
1.
Select the mounting location in the enclosure.
2. Position the D2071A in the desired location.
3. Use a pencil to mark the mounting tab holes.
4. Drill holes (1/8 in. [3.18 mm]) for the screws
provided.
5. Mount the D2071A using the two # 8 screws and
washers provided.
2.9.2
D2002 Mounting Plate
Use the D2002 Mounting Plate to mount the D2071A in
a D4103R Enclosure provided with the D2071AC Kit.
a D4103R Enclosure provided with the D2071AC Kit.
1.
Use the four #6 screws (provided) to secure the plate
to the four standoffs in the D4103R Enclosure.
to the four standoffs in the D4103R Enclosure.
2. Use the two #8 screws (provided) to mount the
D2071A to the mounting plate.
2
1
Figure 10: Securing Cable Tie and Wires
1 - Strain relief tab
2 - Cable tie
1
2
Figure 9:
Inserting Cable Tie
1 - Strain relief tab
2 - Cable tie
2.9.3
Adhesive Strip Mounting
You can use two adhesive strips (provided) to mount the
D2071A in the enclosure with the FACP, or in a separate
enclosure.
D2071A in the enclosure with the FACP, or in a separate
enclosure.
1.
Select a location with a smooth, clean, and dry
mounting surface.
mounting surface.
2. Position the D2071A so the back is facing you.
3. Remove the protective backing from one side of the
5 in. (12.7 cm) adhesive strip.
4. Press the strip firmly to the back of the D2071A
near the top edge.
5. Remove the protective backing from the other side
of the 5 in. (12.7 cm) adhesive strip.
6. Press the strip firmly to the back of the D2071A
near the bottom edge.
7.
Bend back or remove any tabs in the enclosure that
can prevent the D2071A from being securely
mounted.
can prevent the D2071A from being securely
mounted.
8. Remove the remaining protective backing from the
adhesive strips.
9. Firmly press the D2071A to the location.
2.10
End User Instruction Label
Once the D2071A is connected to an FACP you can use
the end user label (included). Because the D2071A does
not have end user serviceable parts, the label instructs
users to call for service if they cannot silence the
D2071A from the FACP. Attach this label in a location
that is easily visible such as the front of the FACP
enclosure.
the end user label (included). Because the D2071A does
not have end user serviceable parts, the label instructs
users to call for service if they cannot silence the
D2071A from the FACP. Attach this label in a location
that is easily visible such as the front of the FACP
enclosure.
D2071A | Operations & Installation Guide | 2.0 Installation