Bosch Appliances Security Camera PT-400 User Manual

Security Escort | Technical Reference Manual | 6.0  Security Escort 
Pager Setup 

EN | 74 

 

 

Bosch Security Systems | 6/12 | 38947D 

 

 

Pager access is setup in the Pager 
Setup Screen under the Setup Menu. 
Refer to the Pager Setup Screen for the 
details not covered here. 

 

For both the service and security 
pagers, an individual pager (phone 
number, password, and pager ID) can be 
assigned. The pager ID is required for 
all individual pagers, dial-up and 
local. If the phone number and password 
are assigned, the page is sent over the 
modem connection. If the phone number 
and password fields are both blank, the 
page is routed to the local paging 
system. If you do not desire an 
individual pager, leave the phone 
number, password, and pager ID fields 
blank. 
Both the service and security pagers 
also support paging groups. If a group 
number is programmed in the pager group 
field, all the members of that group 
are paged for every service or alarm 
page. 

If service or alarm pages are enabled, 
either the paging group or individual 
pager must be filled in. They may both 
be filled in if desired. 
The baud rate assignments in this 
screen affect only the dial-up paging 
access through the modem (get the 
desired baud rate from the paging 
company). These baud rate selections 
have no effect on local paging systems 
or remote system access. Remember that 
dial-up pages may be routed to 
different paging companies and they may 
require different baud rates. Set the 
baud rate to the highest baud rate 
common to all of the paging companies 
to be accessed. 
The character limit (characters per 
page), pages per call affect all pages 
of the indicated type (local and dial-
up). These fields must be set to the 
lowest setting for any of the routes 
that may be used. Remember that dial-up 
pages may be routed to different paging 
companies and they may have different 
restrictions.  

In the Subscriber Database, select the 
record for the desired individual. 
Press Edit data then press Advanced. 
The screen displays. 
The pager ID is required for all 
individual pagers dial-up and local. If 
the phone number and password are 
assigned, the page is sent over the 
modem connection. If the phone number 
and password fields are blank, the page 
is routed to the local paging system. 
If you do not desire this individual to 
have pager support, leave the phone 
number, password, and pager ID fields 
blank.