Bosch Appliances Security Camera NBC-265-W User Manual

en | Browser connection

IP Camera 200 Series

AR18-10-B012 | v1.54 | 2011.08

Installation and Operation Manual

Bosch Security Systems

The camera must be assigned a valid IP address to operate on 

your network. The default address pre-set at the factory is 

192.168.0.1

1.

Start the Web browser.

2.

Enter the IP address of the camera as the URL. 

If the connection is not established, the maximum number of 

possible connections may already have been reached. 

Depending on the device and network configuration, up to 25 

web browsers, or 50 Bosch VMS connections are supported.

A camera offers the option of limiting access across various 

authorization levels. If the camera is password-protected, a 

message to enter the password appears. 

1.

Enter the user name and the associated password in the 

appropriate fields.

2.

Click OK. If the password is correct, the desired page is 

displayed.

If a RADIUS server is used for network access control (802.1x 

authentication), the camera must be configured first. To 

configure the camera for a Radius network, connect it directly 

to a PC via a crossed network cable and configure the two 

parameters, Identity and Password. Only after these have been 

configured can communication with the camera via the network 

occur.