Bosch Appliances Network Card C900V2 User Manual
Conettix C900V2 | Installation Guide | 4.0 C900V2 Configuration Setup Instructions
.
Bosch Security Systems, Inc. | 8/08 | F01U087780-01
15
After a few seconds, an error message
appears.
appears.
4. Click OK to clear the message. The Telnet
window appears again.
5. Select Connect Æ Remote System.
The Connect dialog box appears again.
6. This time, change the Port field to 9999,
accept the other fields, and click Connect.
This message appears.
This message appears.
7. Press [ENTER].
You must press [ENTER] within five
seconds or the telnet session
disconnects.
seconds or the telnet session
disconnects.
The Telnet window shows this information.
Continue with Section 4.5.3 Configuration Using
Telnet on page 16.
4.5.2 Starting
Telnet on page 16.
4.5.2 Starting
Windows 2000/XP Telnet
To do this procedure, you must log in at
an administrator privilege level.
an administrator privilege level.
The MAC address, IP address, gateway
IP address, and port number in this
procedure are examples and are not the
same as those for your C900V2.
IP address, and port number in this
procedure are examples and are not the
same as those for your C900V2.
1. Select Start Æ Run.
The Run dialog box appears.
2. In the Run dialog box, type telnet and click OK.
The Telnet window appears.
3. Type open <IP ADDRESS> 1 and press
[ENTER] (where <IP ADDRESS> is the IP
address of the C900V2). Type a space after
open and after the IP address. For example:
open 172.17.10.70 1.
The connection fails the first time. This is
normal.
address of the C900V2). Type a space after
open and after the IP address. For example:
open 172.17.10.70 1.
The connection fails the first time. This is
normal.
Repeat the previous step using 9999 as the port
number:
4. Type open <IP ADDRESS> 9999 and press
number:
4. Type open <IP ADDRESS> 9999 and press
[ENTER] (for example, open 172.17.10.70
9999).
9999).