Bosch Appliances Network Card C900V2 User Manual

Conettix C900V2 | Installation Guide | Contents 

. 

 

Bosch Security Systems, Inc. | 8/08 | F01U087780-01 

5

 

3

A

3

2

4

6

6

5

1

 

3.  Place the top edge of the C900V2 (4) under the 

standoff bracket of the top two standoffs (1). 

4.  Insert two of the Phillips

®

 head screws provided 

(5) through the holes in the top standoffs (3). 

5.  Lower the bottom edge of the module to rest 

against the ledge of the two bottom standoffs (2). 

6.  Insert the other two Phillips head screws (5) into 

the bottom two mounting holes (6) on the C900V2 
and through the bottom two plastic standoffs (2) 
and mounting bracket (3). 

7.  Tighten the screws until the C900V2 is attached 

securely to the mounting plate. 

Refer to Figure 3. 

1

2

 

 

1.  Slide the tabs (1) at the top of the mounting plate 

over the top lip of the enclosure door (2). 

2.  Position the mounting plate on the side farthest 

from the door hinge. 

2.1.3  Separate Enclosure Mounting 
You can mount the C900V2 in a separate enclosure 
such as the AE2. Refer to Figure 4. 

 

Mount the enclosure on a vertical 
surface before you install the C900V2 
because the C900V2 covers one of the 
mounting holes (9). 

 

1.  Place the top edge of the C900V2 (1) between the 

two slots (2) on the inside top of the enclosure (3). 

2.  Insert the top hook of the top plastic standoffs (4) 

into the mounting brackets (5) on the back wall of 
the enclosure (6), showing a side view of the 
standoff in the mounting bracket). 

3.  Align the bottom two mounting holes (7) on the 

C900V2 with the plastic standoffs (4) and the 
enclosure mounting brackets (5). 

4.  Insert two screws (8) into the holes and slowly 

tighten until the C900V2 is secured firmly to the 
enclosure. 

 

2

9

3

1

8

4

6

5

7