Bosch Appliances Home Security System PLE-10M2-EU User Manual
Bosch Security Systems | 2008-03 | PLE-10M2-EU en
Plena Easy Line Mixer | Installation and User Instructions | Description
en | 12
2.4.3
Rear panel
See figure 2.3 for an overview of the connectors and
switches:
switches:
1 Microphone/line 1 input with trigger, Euro style
pluggable screw terminal connector - DIP switch
settings for: chime, PTT (push to talk), mic/line,
speech filter, and phantom power (see number 3).
Input is wired in parallel with microphone/line 1,
XLR connector (see number 2).
settings for: chime, PTT (push to talk), mic/line,
speech filter, and phantom power (see number 3).
Input is wired in parallel with microphone/line 1,
XLR connector (see number 2).
2 Microphone/line 1 input, XLR connector - DIP
switch settings for: chime, PTT (push to talk),
mic/line, speech filter, and phantom power (see
number 3). Input is wired in parallel with
microphone/line 1, Euro style pluggable screw
terminal connector (see number 1).
mic/line, speech filter, and phantom power (see
number 3). Input is wired in parallel with
microphone/line 1, Euro style pluggable screw
terminal connector (see number 1).
3 DIP switch for microphone/line 1 and microphone/
line 2 (see numbers 1 and 2, and 4 respectively).
4 Microphone/line 2 input, XLR connector - DIP
switch settings for speech filter, mic/line, VOX, and
phantom power (see number 3).
phantom power (see number 3).
5 Microphone/line 3 input, XLR connector - DIP
switch settings for mic/line, and phantom power
(see number 6).
(see number 6).
6 DIP switch for microphone/line 3 and microphone/
line 4 (see numbers 5 and 7 respectively).
7 Microphone/line 4 input, XLR connector - DIP
switch settings for mic/line, and phantom power
(see number 6).
(see number 6).
8 Microphone/line 5 input, XLR connector - DIP
switch settings for mic/line, and phantom power
(see number 9).
(see number 9).
9 DIP switch for microphone/line 5 and microphone/
line 6 (see numbers 8 and 10 respectively).
10 Microphone/line 6 input, XLR connector - DIP
switch settings for mic/line, and phantom power
(see number 9).
(see number 9).
11 Mains voltage switch, C13 - 115/230
VAC 50/60 Hz.
12 Tel. emergency/100V input, Euro style pluggable
screw terminal connector - VOX function. This input
has highest priority.
has highest priority.
13 Telephone emergency/100V input volume control -
control range -25 dB to 0dB (see number 12).
14 Chime volume control for microphone/line input 1
15 Ducking level control for microphone/line inputs 1
and 2.
16 Call station input, RJ-45 connector - PLE-2CS or
PLE-2CSMM, chimes are in call station. This input
has second highest priority.
has second highest priority.
17 Remote control wall-panel-input, RJ-45 connector.
Wall panel incorporates: BGM source selection, and
zone on/off control.
zone on/off control.
18 Music input (number 1 disc), 2x RCA/cinch
connectors. Stereo, summed mono.
19 Music input (number 2 radio), 2x RCA/cinch
connectors. Stereo, summed mono.
20 Music input (number 3 auxiliary), 2x RCA/cinch
connectors. Stereo, summed mono.
21 Pre-out, amp in insert, 2x RCA/cinch connector -
can be used for EQ or feedback suppressor.
22 Master switch for line out or music (see number 23).
23 Music master output, XLR connector - switch setting
23 Music master output, XLR connector - switch setting
for line out, or music only (see number 22).
24 Volume override output and 24 VDC input:
•
•
Volume override output - Euro style pluggable screw
terminal connector.
terminal connector.
•
24 VDC backup power input - Euro style pluggable
screw terminal connector.
screw terminal connector.
25 Zone 1 output, XLR connector, balanced.
26 Zone 2 output, XLR connector, balanced.
27 Mains fuse.
28 Earth connection screw.
26 Zone 2 output, XLR connector, balanced.
27 Mains fuse.
28 Earth connection screw.
29 Mains connector (3-pole).
Note
The unit must be earthed.
The unit must be earthed.