Bosch Appliances Home Security System LTC 9384/00 Leaflet

Page of 2
EN | 2
LTC 9384/00 | Instruction Manual | Sunshield
1.0
UNPACKING
This equipment should be unpacked and handled with
care. If an item appears to have been damaged in
shipment, notify the shipper.
Verify that all parts shown in the Parts List have been
included. If any items are missing, notify your Bosch
Security Systems Sales or Customer Service
Representative.
The original packing carton is the safest container in
which to transport the unit. Save it for possible future use.
1.1
Parts List
2.0
DESCRIPTION
The LTC 9384/00 sunshield provides protection from
the direct rays of the sun and promotes cooling to
reduce internal housing temperatures on the LTC 9384
Series Housings and 3-inch pressurized housings.
3.0
INSTALLATION
3.1
Installing Sunshield
1.  Slide the sunshield onto the housing from the
rear or the front of the housing (see FIGURE 1).
2.  Position the slot in the sunshield over the
housing mounting holes. (see FIGURE 2).
3.  Secure the sunshield by passing the housing
mounting screws (not provided) through the
sunshield slot and tightening them.
4.  The sunshield can be adjusted forward and back
for more or less overhang.
©
2005 Bosch Security Systems GmbH
3935 890 41212  05-09 | Updated February 28, 2005 | Data subject to change without notice.
Americas
Bosch Security Systems
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: 
+1 (585) 223 4060
Fax:
+1 (585) 223 9180
E-mail: 
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
E-mail: ema.securitysystems@bosch.com
http://www.boschsecurity.com
Asia-Pacific
Bosch Security Systems Pte Ltd
38C Jalan Pemimpin
Singapore 577180, Singapore
Phone:
+65 319 3488
Fax:
+65 319 3499 
E-mail: 
sg.securitysystems@bosch.com
http://www.boschsecurity.com
Qty
Item
Unit (verify model number)
1
Sunshield
1
This installation manual
Sunshield
Sunshield
Sunshield Slot
Front of
Housing
Sunshield
Housing
Sunshield
Housing
Mounting
Holes
Figure 1:  Assembling the Sunshield
Figure 2:  Assembled Sunshield