Bosch Appliances Home Security System FW5.50 User Manual

en | Alarm

Camera Browser Interface

AM18-Q0611 | v5.50 | 2012.03

Software manual

Bosch Security Systems

3.

Enter the password in the Destination password field.

4.

Set the user password of all the remote stations to be 

accessed using this password.

Setting destination 10 to the IP-address 0.0.0.0 overrides its 

function as the tenth address to try.

If the device is operated behind a firewall, select TCP (HTTP 

port) as the transfer protocol. For use in a local network, select 

UDP.

To enable multicast operation, select the UDP option for the 

Video transmission parameter here and on the Network page.

In the event of an alarm, a larger network bandwidth is 

sometimes required for additional video streams (if multicast 

operation is not possible). 

Select a stream to be transmitted.

Select an appropriate browser port depending on the network 

configuration. The ports for HTTPS connections are only 

available if the On option in SSL encryption is selected.

If a decoder device is used, select the analog video output to 

which the signal should be switched. If the destination device is 

unknown, select the First available option. This places the 

image on the first video output with no signal. 

The connected monitor only displays images when an alarm is 

triggered. 

If a split image is set for the selected video output, select a 

decoder to display the alarm image. The decoder selected 

determines the position of the image.