Bosch Appliances Home Security System FW5.50 User Manual

en | Network

Camera Browser Interface

AM18-Q0611 | v5.50 | 2012.03

Software manual

Bosch Security Systems

Enter the desired IP address for the camera. The IP address 

must be valid for the network.

Enter the appropriate prefix length for the set IP address.

For the device to establish a connection to a remote location in 

a different subnet, enter the IP address of the gateway here. 

Otherwise, this field can remain empty (0.0.0.0).

The device is easier to access if it is listed on a DNS server. For 

example, to establish an Internet connection to the camera, it is 

sufficient to enter the name given to the device on the DNS 

server as a URL in the browser. Enter the DNS server's IP 

address. Servers are supported for secure and dynamic DNS.

If the device is used behind a firewall, TCP (Port 80) should be 

selected as the transmission protocol. For use in a local 

network, choose UDP.

Multicast operation is only possible with the UDP protocol. The 

TCP protocol does not support multicast connections.

Select a different HTTP browser port from the list if required. 

The default HTTP port is 80. To limit connection to HTTPS, 

deactivate the HTTP port. To do this, activate the Off option.

To limit browser access to encrypted connections, choose an 

HTTPS port from the list. The standard HTTPS port is 443. 

Select the Off option to deactivate HTTPS ports and limit 

connections to unencrypted ports.