Bosch Appliances Home Security System DS7400XIV4-EXP User Manual

Page of 40
DS7400XiV4-EXP | User Guide | 7.0   Emergency Procedures 
EN | 22 
 
 
Bosch Security Systems | 6/05 | 4998154961B 
 
7.10  Turning OFF (Disarming) Your System under Duress 
A Duress PIN (refer to Section 8.0 Personal Identification Numbers (PINs) on page 23 and Section 8.4 PIN Authority 
Levels
 on page 24) is used when someone demands, by threatening your life or well-being, that you turn the system 
off. When used, the Duress PIN turns off the system and reports a silent Duress alarm if the system is connected to 
a monitoring service. When disarming the system normally, use extreme care when entering your PIN to turn off 
the system, so you do not inadvertently enter a Duress PIN. 
You can enter the Duress PIN at any keypad, but you cannot disarm the system under duress from a keyfob. In a 
duress situation, avoid using a keyfob to disarm the system since this prevents you from notifying the monitoring 
service of your need for assistance. 
 
Table 20: Disarming Your System under Duress 
 
 
 
 
Equipment  
Command Sequence 
What Happens 
What To Do 
Text Keypad LED 
Keypad 
[Duress PIN][Off] 
•  The system appears to disarm 
normally.  
•  A Duress Code is sent to your 
monitoring service. 
Protect your life and well-
being while awaiting 
assistance. 
RF3341 Keypad 
[Duress PIN][#] 
•  The system appears to disarm 
normally.  
•  A Duress Code is sent to your 
monitoring service. 
Protect your life and well-
being while awaiting 
assistance. 
RF3332/RF3332E, 
RF3334/RF3334E 
Not applicable