Bosch Appliances Home Security System D9000 User Manual

D9000,G & GV2 Series | Owner's Manual Supplement  

 

 

Bosch Security Systems | 5/05 | 33267F 

13 

 

 

10.3 

Cycle Door?

 

1. 

To momentarily unlock an access door and allow a person into an 
area, press [ENT] at the Cycle Door? prompt. 

 

The display shows 

CYCLE 1 2 3 4 5 6 7 8

 

if all doors are in 

a normal state and available. If a door is not in a normal state, the 
number of the door is replaced with one of the symbols indicated 
in Table 1. 

 

Table 1: Key to Symbols 

 

 

Symbol Description 

--- 

Door is not active, not in scope, or user does 
not have access level authority 

C 

Door is timed door sequence 

U 

Strike and shunt are latched active (held open) 

X 

Strike and shunt are deactivated (secured) 

P 

There is a problem with the door; call your 
security company 

 

 

2. 

Enter the number of the door to cycle then press [ENT]. This 
door cycles and the display changes to reflect the new status of 
the doors.  For example, to cycle Door 3, at the following prompt: 

 

CYCLE DOOR 1 2 3 4 5 6 7 8

 

 

press [3], then [ENT]. The display shows: 

 

CYCLE DOOR 1 2 C 4 5 6 7 8

 

 This 

indicates that all doors are in a normal state, except for Door 

3, which is cycled. 

3. Press 

[ESC]

 to leave this subfunction, or enter another door 

number to cycle.