Bosch Appliances Home Security System D9000 User Manual

D9000,G & GV2 Series | Owner's Manual Supplement  

 

18 

Bosch Security Systems | 5/05 | 33267F 

 

appears. Enter the new passcode followed by [ENT]. 

ENTER 

AGAIN

 

appears. Enter the new passcode a second time for 

confirmation. Press [ENT]. The display shows 

PASSCODE ADDED

  

(or 

PASSCODE CHANGED

 

if the user number was already in the 

system). 

 

 

The system does not accept a passcode that is within two 
digits of an existing passcode. This is to avoid conflicts with 
duress passcodes. For example, if passcode 123 is already 
programmed in the system, the system does not accept 121, 
122, 124, or 125 as passcodes. 

 

 

Systems With Access Control... 

 

 

•

 

If your system includes access control features, such 
as card readers at doors, the following prompt 
appears: ADD CARD? (CHANGE CARD? appears for 
users who already have cards.) 

•

 

If the user has card or token access to the building or 
area, press [ENT]. PRESENT CARD appears. Present 
the card at the card reader and wait for the tone. If the 
card or token is read correctly, a tone sounds and the 
command center keypad shows CARD ADDED (or 
CARD CHANGED if the user already has a card or 
token). Press [ENT]. 

 

7. 

ADD LEVEL?

 

(CHANGE LEVEL?

 

If the user number already 

exists) appears. Press [ENT]. 

8. 

VALID AREA 1? 

appears. If you wish this user number to be 

valid in Area 1, press [ENT]. If not, press [NEXT]. 

9. 

AUTH LEVEL

 

appears. Assign the authority level you wish the 

user number to have for this area and press [ENT]. Record this 
information. 

10. 

VALID AREA 2?

 appears. Enter the information necessary for 

the areas in the scope of the keypad by following steps 8 and 9 for 
each area (up to 8 areas). 

LEVEL ADDED

 

(or 

LEVEL CHANGED

) 

appears when all area assignments are made. Press [ENT].