Bosch Appliances Home Security System D1265 User Manual
D1265 | Owner's Manual | Part III: Advanced Commands
Bosch Security Systems, Inc. | 9/10 | F01U169130-02
39
Door Control (CMD + 4 + 6)
Description
There are three functions with the door control
function:
Cycle Door – momentarily unlocks a door to
function:
Cycle Door – momentarily unlocks a door to
allow a person into an area
Unlock Door – unlocks a door to allow free access
Secure Door – locks a door and prohibits access
Secure Door – locks a door and prohibits access
regardless of a user’s authority level
Using Door Control
1. Ensure your keypad shows idle disarmed text.
2. Press the
CMD button. The display shows
*System Command*.
3. Press the
4 button and the 6 button.
If you prefer, you might use the function
list in place of Steps 2 and 3 to initiate
this function.
list in place of Steps 2 and 3 to initiate
this function.
Press the Menu button to enter the
function list.
function list.
Press the Next button repeatedly.
When you reach the Door Control Menu
button, press it.
button, press it.
4. The display changes and shows all authorized
choices of
Cycle Door, Unlock Door, and
Secure Door.
Press the desired button.
Cycle Door
1. If you wish to momentarily unlock an access
door to allow a person into an area, press the
Cycle Door button.
Cycle Door button.
2. The display reads *
Cycle Door*1 2 3 4 5 6 7 8
if all door are at a normal state and are
available.
available.
If a door is not at a normal state, the number of the
door would be replaced with a symbol indicated in
Table 3.
door would be replaced with a symbol indicated in
Table 3.
If a door is not at a normal state, the number of the
door would be replaced with a symbol indicated in
Table 3.
door would be replaced with a symbol indicated in
Table 3.
Table 3: Door Status
Symbol Meaning
-
Door is not active, in scope, or user will not
have access level authority.
have access level authority.
C
Door is on timed door sequence.
U
Strike and shunt are latched active (held
open).
open).
X
Strike and shunt are deactivated (secured).
F
There is a problem with the door. Call your
security company.
security company.
1 - 8
Door is locked and ready for a command.
3. Enter the number of the door you wish to cycle
then press the
ENTER button. This door is
cycled and the display changes to reflect the
new status of the doors.
new status of the doors.
For example, if you wanted to cycle Door 3,
press
press
3 then press the ENTER button.