Bosch Appliances DVR DVR 440 User Manual

en | Quick install

Digital Video Recorder 440/480 Series

AM18-Q0605 | v2.0 | 2012.04

Installation and Operation manual

Bosch Security Systems

To get the unit quickly operational, make the connections described below and then enter the 

relevant data in the Quick install menu. The Quick install menu appears the first time the unit 

is started.

Back panel connections for the 4-channel model* 

1.

Connect the cameras to the VIDEO IN BNC connectors.

2.

Connect monitor A to the VGA MON A output (supporting 800x600, 1024x768, or 

1280x1024).

3.

Connect a USB mouse to the USB port.

1.

Connect monitor B to the C MON B BNC connector.

2.

Connect an audio signal to the AUDIO IN RCA (CINCH) input.

3.

Connect the AUDIO OUT RCA (CINCH) output to the monitor or an audio amplifier.

4.

Connect up to 4/8 alarms to the ALARM IN inputs (via the supplied terminal blocks).

5.

Connect the ALARM OUT output (via the supplied terminal blocks).

6.

Connect a pan/tilt/zoom control unit to the RS-485 port (via the supplied terminal block).

7.

Connect to your network via the RJ-45 Ethernet port.

8.

Connect a “Bosch RS232 to Bi-phase converter” to the RS-232 port if required.

Switch on all connected equipment.

–

Connect the power unit to the AC power outlet.

–

Connect the DC power cord to the 12VDC connector on the unit.

* 8-channel models have 8 video connectors and 2 alarm input connectors.