Bosch Appliances DVR DVR 440 User Manual
62
en | Configuration menu
Digital Video Recorder 440/480 Series
AM18-Q0605 | v2.0 | 2012.04
Installation and Operation manual
Bosch Security Systems
6.4
Event
Use the Event menu to specify the desired behavior for an Input, detected Motion, or System
failures; also define how alarms are acknowledged.
6.4.1
Input
Figure 6.12
Event - Input
Inputs are always active on the unit.
Input Type
The Event behavior can be configured independantly for each channel.
–
N.O. - Normally Open causes an alarm to tigger only when the circuit closes
–
N.C. - Normally Closed causes an alarm to tigger only when the circuit is opened
Camera
Set the camera between 1 and 4, which is set to an alarm based on the input.
Relay output
Select the relay to trigger in response to the input.
PTZ
–
For the camera associated with the input, a PTZ preset can be sent to the camera to
move to a specified pre-position.
–
Enter a pre-position number from 1-255 for each of the PTZ cameras that should be
moved.