Bosch MUM 6610 UC User Manual

18

After removing the small gear wheel
the large gear wheel can be easily
removed by hand.

2.The driveshaft can be readily removed

from the slicer/shredder bowl by
turning the bowl over and pressing
against the driveshaft, as shown in
figure 15, until the gear disengages
and then pulling the driveshaft out.

All components of the slicer/shredder
are dishwasher safe. After washing,
rinse well and dry. Then reassemble
“Universal” whisk. When reassembling
the “Universal” whisk, be sure reinstall
the large gear wheel first, then press
the small gear wheel onto the short
axle, until it engages, see figure 16,
then insert the whisk. After
reassembling the “Universal” whisk,
reinsert driveshaft in bowl before using.

Slicer/shredder, intended use
The slicer/shredder attachment has been
designed for slicing, shredding and/or
grating of vegetables, as well slicing/
shredding of soft cheeses and sausages
or meat and grating of vegetables and hard
cheese.

Use of Slicer/Shredder
Before beginning to use this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work
surface and switched to the Off position,
“O/Off,” and that you have moved the  motor
drive cover to the drive that will not be used,
see figure 17a.

1. Before using the slicer/shredder for the

first time, it is recommended that the
bowl,  cover, closure/pusher, discs, disc
holder and “Universal” beater be
washed.

The blades on the discs are very sharp.
Handle with care.

To facilitate cleaning it is recommended
that the “Universal” beater be
disassembled and that the driveshaft
be removed from the slicer/shredder
bowl:

1.The “universal” beater can be

disassembled as shown in figure 14.
First remove the whisk from its
holder, as shown in 14a. Then, using
a long flat object, like the handle of a
teaspoon, pry up the small gear wheel
and remove, as shown in figure 14b.