Bosch 2000 User Manual

Page of 72
2000 Series | Program Entry Guide | About This Manual 
EN | 2 
 
 
Bosch Security Systems | 7/05 | 35114F 
 
About This Manual 
This guide describes the programming parameters 
available to the 2000 Series Control Panels (except 
D2012/D2012U). This guide follows the organization of 
the D2212 Product Handler in the D5200 Programmer. 
The table of contents lists each programming section, 
program item, and its page number.  
Throughout this manual, programming prompts are 
shown in bold italic letters (such as  
Phone 1
). 
Use the Program Record Sheet (P/N: 35113) to record 
your program entries. Installation instructions can be 
found in the panel’s Installation Guide. The Keypad 
Diagnostics
 Sheet provides specific diagnostic and testing 
information. A Security System User Guide comes with the 
keypad. 
E Version Control Panels 
The E versions of the 2000 Series Control Panels (for 
example, the D2412UE) do not include point 
expansion. They are limited to the on-board points. 
Any programming for point expanders does not apply 
to E version control panels.   
Using this Guide for Keypad 
Programming 
Keypad programming requires a text keypad. For an 
explanation, refer to Section 18.0 Keypad Programming of 
this manual. 
Display text and keypad programming appear as 
shown: 
0000 
0 to 9, B to F 
Default entries and selections for keypad programming 
also appear in shaded boxes.