Bogen UDMS16BP User Manual

Page of 12
5
5...Channel.Selection
     Turn the frequency rotary DIP.SWITCH.(11) to one of the sixteen channels. The 
    slot on the switch shaft should match a number or letter on the dial, which 
    indicates the selected channel.
6..Audio.Level.and.Peak.LED.Indicator
    The UDR16 receiver is equipped with a five segment LED.AUDIO.LEVEL.DISPLAY.
....(15)
. Occasional flickering of the top Peak LED indicator on loud inputs to 
    the transmitter is normal. If this LED lights continuously, turn down the INPUT 
    LEVEL CONTROL on the transmitter, or noticeable distortion may result.
7..Connecting.the.Audio.Output
   The UDR16 receiver provides both a fixed mic level BALANCED.MIC.AUDIO.
....OUTPUT.XLR.(7)
 and an adjustable line level AUDIO.OUTPUT.1/4”.jack.(10).
Tip = signal (+)
Sleeve = ground
Rear Panel XLR
Unbalanced 1/4” Plug
(Note: As when making any connection, make sure the amplifier or mixing board 
volume is at the minimum level before plugging in the receiver to avoid possible 
sound system damage.)