BMW K 1100 LT/RS User Manual
21.8
Installing clutch housing
•
Coat tapers in clutch housing with
Optimoly MP 3 or similar.
Optimoly MP 3 or similar.
•
Fit thrust washer (1) on the clutch housing.
•
Using retaining device, fit clutch housing in the
correct position.
correct position.
•
Install thrust ring (4) with new O-ring (3).
•
Screw on hexagon nut (5).
e
Caution:
The hexagon nut must be renewed every time it is
removed.
removed.
X
Tightening torques:
1.
Tighten hexagon nut
.............................. 140 Nm
2.
Loosen hexagon nut again
3.
Tighten hexagon nut
................................ 50 Nm
4.
Tightening angle
.......................................... 50 °
LT210050
3
1
5
4
2