BMW K 1100 LT/RS User Manual
46.18
Checking frame with gauge
•
Remove fairing.
•
Support motor cycle with lifting gear,
BMW No. 00 1 510.
BMW No. 00 1 510.
•
Remove telescopic fork.
•
Outer bearing race at top and bottom remain in
steering head.
steering head.
•
[RS] Remove left and right footrest plate.
•
Release frame securing screw at gearbox.
L
Note:
After releasing the frame securing screw at the gear-
box, check that the screws can be screwed in again
easily.
If this is not possible, the frame is in all probability
distorted.
box, check that the screws can be screwed in again
easily.
If this is not possible, the frame is in all probability
distorted.
•
Fit adapter, BMW No. 46 5 606, instead of se-
curing screws.
curing screws.
•
Screw measuring discs, BMW No. 46 5 603, at
the same level on the adapter.
the same level on the adapter.
•
Connect frame test gauge (1),
BMW No. 46 5 600,at bottom of steering head
and clamp together frame and gauge with spin-
dle (2), BMW No. 46 5 604, and crank (3).
BMW No. 46 5 600,at bottom of steering head
and clamp together frame and gauge with spin-
dle (2), BMW No. 46 5 604, and crank (3).
LT460230
2
3
46 5 600
1