BMW K 1100 LT/RS User Manual
11.30
Removing slipring seal and shaft sealing ring
•
Press out slipring seal (6) with a drift.
•
Using a 5 mm (0.2 in) wide screwdriver, carefully
press out sealing ring (5).
press out sealing ring (5).
Removing pressure relief valve
•
Loosen threaded union (12) and pull out
spring (13).
spring (13).
•
Pull valve piston (14) out with a magnet and ex-
amine it for damage.
amine it for damage.
Installing pressure relief valve
•
Oil valve piston (14) lightly before installing.
•
Insert spring (13) and insert and tighten the
screw plug with a new seal.
screw plug with a new seal.
X
Tightening torque:
Screw plug (12) ............................................ 27 Nm
7
9
11
10
12
13
14
6
5
15
16
LT110432
Install the shaft sealing ring and slipring seal
•
Drive in sealing ring (5) from the water side with
the open side downwards, using drift,
BMW No. 11 1 640, and handle,
BMW No. 00 5 500.
the open side downwards, using drift,
BMW No. 11 1 640, and handle,
BMW No. 00 5 500.
•
Press in slipring seal (6) with drift,
BMW No. 23 1 780, and handle,
BMW No. 00 5 500.
BMW No. 23 1 780, and handle,
BMW No. 00 5 500.
Installing pump shaft and impeller
•
Oil pump shaft (7) lightly and push it into the
housing from the oil side.
housing from the oil side.
•
Place impeller (9) with spacing bushing (10) in
position. When tightening, hold the pump shaft
to prevent it from turning.
position. When tightening, hold the pump shaft
to prevent it from turning.
X
Tightening torques:
Impeller screw (11) ....................................... 33 Nm
Oil pressure switch (15)................................ 40 Nm
Water temperature sensor or
Screw plug (16) .............................................. 9 Nm
Oil pressure switch (15)................................ 40 Nm
Water temperature sensor or
Screw plug (16) .............................................. 9 Nm