Blue Rhino FC-0007 User Manual
SAFETY
SE6 05/05
Safety Section 1-14
© 2005 Alamo Group Inc.
SAFETY
Maintenance and Service Safety Instructions and Practices
Your driving vision may be reduced or impaired by the tractor, cab, or implement. Before driving
on public roadways identify any limited vision areas, and make adjustments to your operating
position, mirrors, and the implement transport position so that you can clearly see the area where
you will be traveling, and any traffic that may approach you. Failure to maintain adequate vision of
the public roadway and traffic can result in serious injury or even death.
on public roadways identify any limited vision areas, and make adjustments to your operating
position, mirrors, and the implement transport position so that you can clearly see the area where
you will be traveling, and any traffic that may approach you. Failure to maintain adequate vision of
the public roadway and traffic can result in serious injury or even death.
(STI-10)
Make sure the PTO shield, integral driveline shields, and input shields are is
installed when using PTO-driven equipment. Always replace any shield if it is
damaged or missing.
installed when using PTO-driven equipment. Always replace any shield if it is
damaged or missing.
(S3PT-8)
Relieve hydraulic pressure prior to doing any maintenance or repair work on
the Implement. Place the Implement on the ground or securely blocked up,
disengage the PTO, and turn off the tractor engine. Push and pull the Remote
Cylinder lever in and out several times prior to starting any maintenance or
the Implement. Place the Implement on the ground or securely blocked up,
disengage the PTO, and turn off the tractor engine. Push and pull the Remote
Cylinder lever in and out several times prior to starting any maintenance or
repair work.
(S3PT-9)
Always disconnect the main PTO Driveline from the Tractor before performing service on the
Implement. Never work on the Implement with the tractor PTO driveline connected and running.
Rotating Parts, Blades or Drivelines could turn without warning and cause immediate
entanglement, injury or death.
Implement. Never work on the Implement with the tractor PTO driveline connected and running.
Rotating Parts, Blades or Drivelines could turn without warning and cause immediate
entanglement, injury or death.
(S3PT-11)
Never interfere with factory-set hydraulic calibrations. Any change in calibration could cause a
failure of the equipment and may result in injury.
failure of the equipment and may result in injury.
(SBH-13)
Always maintain the safety decals in good readable condition. If the decals are missing,
damaged, or unreadable, obtain and install replacement decals immediately.
damaged, or unreadable, obtain and install replacement decals immediately.
(SG-5)
Do not modify or alter this Implement. Do not permit anyone to modify or alter this Implement,
any of its components or any Implement function.
any of its components or any Implement function.
(SG-8)
Never work under the Implement, the framework, or any lifted component
unless the Implement is securely supported or blocked up to prevent sudden or
inadvertent falling which could cause serious injury or even death.
unless the Implement is securely supported or blocked up to prevent sudden or
inadvertent falling which could cause serious injury or even death.
(SG-14)